Garden - Electrolux Automower G2 Operator's Manual

3. Garden

Via this option in the main menu you access the driving
settings. Select among the submenus:
• Charge exit settings (3-1)
to set how far the Automower™ should reverse out
of the charging station before it turns and in what
direction the mower should leave the charging
station.
• Drive past wire (3-2)
to set the distance over the boundary wire that the
Automower™ should drive.
• Garden shape (3-3)
to tell the Automower™ which type of garden you
have.
• Check loop (3-4)
to check that the loop is intact or exactly where in
the lawn the wire is.
For examples of setting for Exit and Garden shape,
see "Garden examples" on page 36.
Charge exit settings (3-1)
Normally the Automower™ leaves the charging station
in a direction within the exit sector 90°-270°, where 90°
is called the start angle and 270° is called the end
angle. By manually setting the exit direction you can
control how the Automower™ should leave the
charging station. If the charging station is located in a
passage you can get the best access to all lawns by
using this function.
• Default (3-1-1)
In order for Automower™ to follow the preselected
exit settings: Move the cursor to "Default" and press
YES. Then press YES again to the question "Reset
to default?".
Commands
Timer
Garden
Settings
Exit settings
Drive past wire
Garden shape
Check loop
3-1
Menu functions
Charge exit settings
Drive past wire
Garden shape
Check loop
3-
3012-379
Default
Exit angles
Follow loop out
3-1-1
electrolux automower 31