Shortcuts; Programs - Electrolux Automower G2 Operator's Manual

Control panel

Shortcuts

1. Home:
• Sends the mower to the charging station. Where
it stays until the button is pressed again.
The house icon is lit on the right-hand side of the
display when the button is pressed.
• Move the cursor in the menu structure back to
the main page.
2. Operating mode:
The selected operating mode is shown on the
right-hand side of the display as AUTO respective
MAN.
Press the button to choose between:
• AUTO, the normal automatic operating mode
where Automower™ mows and charges
continuously.
• MAN. If you select MAN and close the control
panel cover when the Automower™ is on the
lawn, it will mow until the battery is discharged. It
will then stop and show the message "Battery
empty". The mower must then be moved
manually to the charging station and then
started manually after charging.
If you select MAN and close the control panel
cover when the Automower™ is in the charging
station the mower will charge completely,
reverse 20 centimetres and stop.

Programs

3. A
4. B
5. C
Under the program buttons you can save sets of
different settings, to reuse or to simplify the use of an
Automower™ in several gardens. Under respective
buttons there are some preset settings. You can
choose to use these or change them.
• To change settings: Make the required settings.
Save by holding down the selected button for 2
seconds, until two beeps are heard close together.
If, for example, button A is pressed the message
"Program A changed" will be shown for 2 seconds
on the display.
• Use the saved information by quickly pressing the
required button.
If, for example, button A is pressed the question
"Use program A?" will appear on the display. If YES
is pressed, the Program A will be selected. The
letter "A" is then shown on the right-hand side of the
display to indicate which program is selected.
26 electrolux automower
1
2
3012-404
3
4
5
3012-405