Planning The Installation - Electrolux Automower G2 Operator's Manual

B. Planning the installation
Charging station
For examples of good positioning of the charging
station, see "Garden shape (3-3)" on page 34.
First and foremost the charging station should be
positioned:
• Centrally in the main area, along the outer edge
and with a large free area in front of the station.
• In the shadow. The battery is spared if it is charged
in the lowest possible ambient temperature.
• On relatively level ground. The height difference
must not differ more than 10 cm between the front
and rear of the charging station.
• Close to a wall socket:
The charging station should be connected to a
230V wall socket via the low voltage cable and
transformer.
The supplied low voltage cable is 20 metres long.
IMPORTANT INFORMATION
The length of the low voltage cable must not be
changed.
The transformer must be placed where it is well
ventilated and is not exposed to direct sunlight. It is
also beneficial if the transformer can be placed
under a roof.
It is recommended to use an earth fault-breaker
when connecting the transformer to the wall socket.
Installation
3012-233
3012-296
3012-220
3012-223
electrolux automower 15