Specifications; Hardware Specifications - Epson LG1-1070 Service Manual

1.2 SPECIFICATIONS

This section provides specifications for the LQ-570/1070 printer.

1.2.1 Hardware Specifications

Printing method
Pin configuration
Feeding methods
Line spacing
Paper insertion
Paper-feed speed
NOTE: The points below provide precautions for handling paper.
1. Friction feed (release lever in FRICTION POSITION).
(top entrance), or bottom 40.2mm (1.6 in.) (front entrance) area.
Serial, impact, dot matrix
24 wires (12 X 2 staggered, diameter 0.2 mm)
Figure 1-2. Pin Configuration
Friction feed (front/top)
Push tractor feed (rear)
Pull tractor feed (front/bottom)
Push-pull tractor feed (with optional tractor) (rear)
1/6 inch, 1/8, or programmable in units of 1/360 inch
Friction feed Front or rear side
Front, bottom, or rear side
Tractor feed
Friction without CSF
Friction with CSF
Tractor
77.6 msec (l/6-inch feed)
2.2 inches per second (ips) (continuous)
77.6 msec (l/6-inch feed)
2.2 ips (continuous)
77.6 msec (l/g-inch feed)
2.2 ips (continuous)
1-3
REV.-B