Using The Memory Function - Omron HEM-7080 Instruction Manual

HEM-7080-C1_B_M.fm Page 31 Tuesday, March 9, 2010 9:05 AM
3.5

Using the Memory Function

The unit is designed to store the blood pressure and the pulse
rate in the memory for two people (user A and user B) every
time a measurement is completed.
The unit automatically stores up to 84 sets of measurement
values (blood pressure and pulse rate) for each user (A and
B). When 84 sets of measurement values are stored, the
oldest record is deleted to save the most recent values. The
unit also stores 8 weeks of morning averages and 8 weeks of
evening averages for each user (A and B).
Average Function
The unit calculates the average reading based on the three
most recent sets of measurement values taken within 10
minutes of the most recent reading.
Note: If two sets of measurement values are stored in
the memory for the 10 minutes period, the average
is based on the two sets of measurement values. If
one set of measurement values is stored, this is
displayed as the average.
To Display the Measurement Values
1.
Select your user ID (A or B).
2.
Press the MEMORY button (
The average value is shown and the average symbol (
appears above the memory symbol (
3. Using the Unit
).
) on the display.
)
31