Omron HEM-7080 Instruction Manual page 26

HEM-7080-C1_B_M.fm Page 26 Tuesday, March 9, 2010 9:05 AM
3. Using the Unit
Using the Auto Mode
1.
Select your user ID (A or B).
2.
Press the START/STOP button.
All symbols appear on the display. The user ID Symbol
you selected flashes on the display. The cuff starts to
inflate automatically.
Note: To stop the inflation or measurement, press the
START/STOP button. The unit will stop inflating,
start deflating and will turn off.
3.
Inflation stops automatically and the measurement is
started.
As the cuff deflates, decreasing numbers appear on the
display. The heartbeat symbol (
heartbeat. When the measurement is complete, the arm
cuff completely deflates.
Note: Do not move your arm and remain still until the
entire measurement process is completed.
4.
Check the progress of the consecutive measurements.
The first measurement is complete, waiting to start the
next measurement. The interval of time set between each
measurement will appear on the display.
The second measurement starts automatically.
26
) flashes at every