Omron HEM-7080 Instruction Manual page 27

HEM-7080-C1_B_M.fm Page 27 Tuesday, March 9, 2010 9:05 AM
The second measurement is complete, waiting to start the
next measurement.
The third measurement starts automatically.
The consecutive measurements are complete. The
average for the three measurements appears on the
display.
The three individual measurement results are not
displayed while Auto Mode is taking the measurements.
However, the results for each individual measurement can
be displayed after all the measurements have been
completed.
Note: During the Auto Mode the unit will repeat the
measurement in case of an error. After 3 errors the
unit will stop taking further measurements. If only
two measurements are successful the average of
these two measurements will be displayed. If only
one measurement is successful, this result will be
displayed.
5.
Press the SET button to display the blood pressure and
pulse rate for the first measurement. Press the SET button
again to display the next measurement.
6.
Press the START/STOP button to turn the unit off.
3. Using the Unit
27