Omron HEM-7080 Instruction Manual page 14

HEM-7080-C1_B_M.fm Page 14 Tuesday, March 9, 2010 9:05 AM
2. Preparation
Notes on Adjusting the Date and Time Setting
If you need to adjust the date and time for some reason, or if
the date and time has been reset after replacing the batteries,
adjust the date and time between 10:00 AM and 6:59 PM.
This will avoid problems with morning and evening weekly
averages stored in memory.
To adjust the date or time at a later stage, start the unit in the
off position. Follow the steps below.
1.
Press and hold the SET button.
The auto mode symbol
or oFF) will appear on the display for the user ID selected.
If the year is not flashing, press the SET button once or
twice until the year is flashing.
The year flashes on the display.
2.
Refer to page 11 to start setting the date and time.
With this manual setting of date and time the unit needs to
be manually shut off. It will not automatically turn off after
the minutes have been set.
Notes:
• Please ensure that the date and time have been set
correctly so that the weekly averages will be displayed
correctly. If the Date/Time settings have been
accidentally set incorrectly, press the SET button to
circle through the settings in order to adjust to their
correct values.
• In the case where the time displays incorrectly after a
long period of non-use of the unit, reset the Date and
Time (refer to page 11 for instructions on setting the
clock values). Erase the recorded values when reusing
the unit (refer to page 37 for directions on erasing the
recorded values).
14
and the current setting (on