Adjusting The Print Darkness - Intermec EasyCoder 4420 Getting Started Manual

Adjusting the Print Darkness

Use the manual darkness adjust control in combination with the Print Darkness adjustment in
PrintSet to fine-tune the darkness of print on your labels. The fine adjustments compensate for
variations in the media ("lot to lot"), the printhead, or the printer. Set the darkness adjust
control after you enter the media sensitivity number.
For best results in adjusting the print darkness (energy to the printhead), perform these
procedures in order:
1. Set the correct media sensitivity number. For help, see "Setting the Media Sensitivity
Number" earlier in this guide.
2. Adjust the manual darkness adjust control on the back of the printer.
3. Adjust the Print Darkness setting in PrintSet.
To adjust the manual darkness adjust control
O
44XXG.056
31