Intermec EasyCoder 4420 Getting Started Manual page 32

The print darkness adjust in PrintSet is similar to the dark adjust available on a copier. An increase
in print darkness increases the energy to the printhead and results in darker print. A decrease in
print darkness decreases the energy to the printhead and results in lighter print.
To adjust the print darkness setting with PrintSet
1. Start PrintSet on your PC.
2. Click the Paper Type button:
3. In the Print Quality Setup dialog box, adjust the Print Darkness slider bar until the setting that
you want appears underneath it.
You can adjust the print darkness from +10 to -10 (darkest to lightest).
4. Click OK.
5. Download your change to the printer by pressing the button to send command updates to the
attached printer.
32