Keithley 705 Instruction Manual page 41

Table 3-7. Device-Dependent Commands (Cont.1
Command
U
Definition
Alternate Output
V
I
Set Date
Command
D
P"
T"
G"
U"
Notes
UO = Channel
Ul = All Channels
u2= I/O
U3 = Date
U4 = Status
U5 = Setling
U6 = Alarm
U7 = Interval
U8 = First/ Last
Vmm:dd
Wnnn.nnn
YC
Table 3-8. Hierarchy of Command Execution
Iefinition
Iisplay Mode
'rogram
-rigger Modes
'refix Modes
Alternate Output
Notes
DO-Channel
Dl-Interval Time
D2-Time
D3-Date
DCDisplay Message
PO-Step
PI-Single
P2-Continuous
TO-Start on Talk
Tl-Stop on Talk
T2-Star-t on GET
T8Stop on GET
T&Start on "X"
T5-Stop on "X"
TG-Stat-t on External
l7-Stop on External
GO-Channel Data sent with prefix.
Gl-Channel Data sent without prefix.
G2-Buffer State sent with prefix.
G3-Buffer State sent without prefix.
G4-I/O Port sent with prefix.
G5-I/O Port sent without prefix.
G6-Time/Date sent with prefix.
G7-Time/Date sent without prefix.
G8-Status Word sent with prefix.
GS-Status Word sent without prefix.
GIO-Settle Time sent with prefix.
Gl l-Settle Time sent without prefix.
G12-Alarm Time sent with prefix.
G13-Alarm Time sent without prefix.
G14-Interval Time sent with prefix.
G15-Interval Time sent without prefix.
GlgFirst/Last sent with prefix.
G17-First/Last sent without prefix.
UO-Channel
Ul-All Channels
u2-I/O
U3-Date and Time
3-10