Keithley 705 Instruction Manual page 40

Table 3-7. Device-Dependent Commands
lommand Definition
A
Set Number of Poles
Display Channel
Close Channel
Display Mode
Date Format
Set First Channel
Prefix
H
I
J
K
L
M
N
0
P
Q
R
S
T
Settle Time
Save
Debug Test
EOI
Set Last Channel
SRQ
Open Channel
I/O Port
Program
Set Alarm Time
Reset
Set Time
Trigger
Notes
A0 = Matrix Mode
Al = l-pole
A2 = 2-pole
A3 or A4 = 4-pole
Bnnn
Cnnn
DO = Channel
Dl = Interval Time
D2 = Time
D3 = Date
04 = Display Message
EO = American Date Format
El = International Date Format
Fnnn
GO= Channel Data sent with prefix.
Gl = Channel Data sent without prefix.
G2= Buffer State sent with prefix.
G3 = Buffer State sent without prefix.
G4= I/O Port sent with prefix.
G5= I/O Port sent without prefix.
G6 = Time/ Date sent with prefix.
G7 = Time/ Date sent without prefix.
G8= Status Word sent with prefix.
G9= Status Word sent without prefix.
GlO= Settle Time sent with prefix.
Gil = Settle Time sent without prefix.
G12=Alarm Time sent with prefix.
G13= Alarm Time sent without prefix.
G14= Interval Time sent with prefix.
G15 = Interval Time sent without prefix.
G16 = First/ Last sent with prefix.
G17= First/Last sent without prefix.
Hnnn.nnn
II, 12, 13, 14, I5
JO= Run Debug Test
KO = EOI transmitted on last byte out
Kl = Send no EOI
Lnnn
Mnnn
Nnnn
Onnn
PO = Step
PI = Single
P2 = Continuous
Qhh:mm:ss
Opens all channels and displayes FIRST channel.
Shh:mm:s
TO = Start on Talk
Tl = Stop on Talk
T2= Start on GET
T3 = Stop on GET
T4= Start on "x"
T5= Stop on "x"
T6 = Start on External
l7= Stop on External
-
3-9