Operation; Heat And Blower Levels; Cooling Level; Ionisation Function - Silvercrest SHTD 2200 A1 Operation And Safety Notes

Operation

GB

Heat and blower levels

Cooling level

Ionisation function

8
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch 5.
The hair dryer is fi tted with two function switches. With these you can separately
select the strength of the air fl ow ( Blower switch 5) and the level of heat ( Heat
level switch 6):
Blower levels
O The hair dryer is switched off
reduced air fl ow
full power air fl ow
Heat levels
cold air fl ow
low heating level
high heating level
3) After use, switch the appliance off in that you place the blower switch 5 into
position "O". Then remove the plug from the wall socket.
With the cool level switch 7
combination of blower and heat levels.
With the Ionic switch-in 4 you can additionally add the ionic function to every
combination of blower and heat level.
When drying the hair using a hair dryer, the hair takes on a static charge and
begins to "fl y".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.
❄
you can produce a cooler air fl ow with every
SHTD 2200 A1