Installing Drain Hose; Under Ceiling Type - Haier H-MRV Series Service Manual

(Fig. 4)
Wall
6mm
10cm
Indoor unit outdoor unit
For series 14,18,24 when installing set to wall, install
the accessory wall bracket at the position shown in
Fig.5,and mount the set to it.

2. INSTALLING DRAIN HOSE

Select whether the drain hose will be connected to the left or right side.(Fig.3) Insert the drain hose into the drain pan, then secure the
drain hose with a nylon fastener. (Fig.6)
(Fig. 6)
Drain pan
Drain hose
Wrap the insulation (drain hose) around the drain hose connection.(Fig.7)
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor unit.
(Fig. 8)
Arrange the drain hose
lower than this portion.
Do not install the unit drain hose side is too high. Height A should be less than 5 mm.(Fig.9)
(Fig. 9)
B. UNDER CEILING TYPE
Using the installation template, drill holes for piping and anchor bolts(for holes).(Fig.10)
Nylon fastener
OK
CAUTION
Drain hose
A
(Fig. 10)
900mm
Installation
template
200mm
Drilling position
for piping
For series 14,18,24
>a__WcU[S^ <[c >a`V[e[a`Wc
(Fig. 5)
99cm
50cm
6.5cm
7cm hole
3.5cm hole
12.5cm
(Fig. 7)
Drain pan
Drain hose
NO NO
Drain hose
Drain hose
A
Drilling position
for anchor bolt
Ceilling
Wall
-72-
24.5cm
Wall bracket
Side of set
10cm
Insulation
(Drain hose)