Calibrating the digitizer
iX104C5 User's Handbook
Calibrating the digitizer adjusts the cursor position on the screen
relative to the position of the pen tip or finger. Calibrate the digitizer
to adjust the distance error between where the pen or finger is actually
touching the screen and where the computer is registering the pen or
finger touch.
You may need to calibrate the digitizer in the following situations:
You are using the computer for the first time.
■
The previous user of the computer writes with the opposite hand or
■
at a different pen angle.
The computer has not been used for some time.
■
The computer has been serviced.
■
From the
menu, select
1.
Start
The Control Panel opens.
Chapter 3. Maintaining the Tablet
Calibrating the digitizer
.
Control Panel
73