Using The Pen - Xplore iX104C5 User Handbook Manual

Chapter 2. Using the Tablet

Using the pen

Using the pen
32
You can use any of the following methods to select items and to
navigate through programs.
Auto-Sense mode: Use either the multifunction pen or your
■
finger interchangeably. The computer distinguishes between the
two input modes and automatically adjusts accordingly. This is
the tablet's default state.
Digitizer mode: Use only the special multifunction pen provided
■
with the computer.
For more information, see "Programming hot keys to perform pre-
defined functions" on page 63.
WARNING
Do not use items such as a ball point pen or a screwdriver that can
damage the tablet. Damage caused by using an item not provided with
the tablet is not covered by the tablet warranty.
Note: During the first use of the tablet, or if the action you are
trying to perform does not occur when you use the pen or your
finger to touch the screen, calibrate the digitizer as described in
"Calibrating the digitizer" on page 73.
iX104C5 User's Handbook