Using The Baby Monitor; Setting Up; Night Vision Mode; Video On/Off - Motorola MBP27T User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the Baby Unit's head angle by rotating the camera up, down, left and
right until you are satisfied with the image on the Parent Unit.
NOTE
Do not place the Baby Unit within reach of a child or baby(s)! If there is
interference with the picture or sound, try moving the units to different locations,
and ensure they are not close to any other electrical equipment.
3.2

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
of the screen.
3.3

Video ON/OFF

Press the VIDEO ON/OFF button
on or off, but still leave the audio monitor on.
3.4

Talk Mode

Press and hold the
the Baby Unit's loudspeaker. The
screen.
3.5

Touchless Thermometer

The thermometer is designed to precisely measure the temperature of the
forehead (above eye brow and below hair line). Due to the unique body
physiology of each person, it is recommended that you take a person's
temperature at the same temple location to compare measurements. Please
contact your physician or seek medical attention if the fever is high or
prolonged.
12
V
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the top of the LCD
N
icon will be displayed at the top
on the Parent Unit to turn the LCD display
Using the Baby Monitor