Registration (Pairing) - Motorola MBP27T User Manual

2.4

Registration (Pairing)

The Baby Monitor Camera is pre-registered to your Parent Unit. You do not
need to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1. Press the button of the Parent Unit and then press the
to select the Camera setting icon
-
Press the DOWN button to select ADD CAMERA icon
the button to confirm.
1 2 3 4
2. / / /
select the desired Camera identification number and press the
start searching for a Camera Unit. The Green Audio Level LED turns on will
appear while searching.
3. Press and hold the PAIR button under the bottom left edge of the Camera
Unit until the Parent Unit finds the Camera, beeps and the video from the
Camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby
Unit again will overwrite the old registration.
If a Camera Unit is not found within about 30 seconds, the search will end and
the Parent Unit will return to its previous mode.
Getting Started
will pop up, press the
, and press the
+ -
UP button or
-
DOWN button
button to enter.
, and press
DOWN button to
button to
11