Registration (Pairing); View Video Through Tv - Motorola MBP33BU User Manual

2. During power ON, when the adaptor is plugged in, the battery icon in
the top right corner will show that the battery is charging. The Blue
LED at the top left turns on to indicate the adaptor is plugged in, and
flashes while the battery is charging.
2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
M
1. Press the
<
2. Press the
del/add/view/scan
and the
+
3. Press the
the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the
parent unit finds the camera, beeps and the video from the camera
appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the
Parent Unit and into the AV input of the TV. Scroll through the AV inputs
on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
NOTE
The Monitor's power button must be turned ON and CAM pre-selected
before connecting the AV cable. Once the AV cable is connected, the
Monitor's controls cannot be activated.
10
button of the parent unit and the menu bar will pop up.
LEFT button or
menu will pop up.
-
UP button or
CAM 3 CAM 4
/ / will pop up, press the
>
RIGHT button until
DOWN button to select
C
is highlighted,
ADD
, and press
+
UP button or
Getting Started
-