Managing User Accounts; Adding A User - HIKVISION DS-7100NI-SL series User Manual

User Manual of Network Video Recorder

13.5 Managing User Accounts

Purpose:
There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.

13.5.1 Adding a User

Steps:
1. Enter the User Management interface.
Menu >Configuration>User
2. Click the Add button to enter the Add User interface.
3. Enter the information for new user, including User Name, Password, Level and User's MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User's MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13. 7.
Figure 13. 5 User Management Interface
Figure 13. 6 Add User Menu
189