HIKVISION DS-7100NI-SL series User Manual page 86

User Manual of Network Video Recorder
Protect file by setting HDD property to Read-only
Steps:
1. Enter HDD setting interface.
Menu> HDD
2. Click to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
HDD Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
 You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
property to R/W.
 If there is only one HDD and is set to Read-only, the NVR can't record any files. Only live view mode is
Figure 5. 28 Unlocking Attention
Figure 5. 29 HDD General
Figure 5. 30 HDD General- Editing
85