Front Panel; Ds-8600Ni-E8 - HIKVISION DS-7100NI-SL series User Manual

User Manual of Network Video Recorder

1.1 Front Panel

DS-8600NI-E8

No. Name
Status
1
Indicators
2 IR Receiver
3 DVD-R/W
4 Alphanumeric Buttons
5 USB Interfaces
Composite
6
Keys
Figure 1. 1 DS-8600NI-E8
Table 1. 1 Description of Control Panel Buttons
Function Description
ALARM Turns red when a sensor alarm is detected.
Ready indicator is normally blue, indicating that the device is
READY
functioning properly.
Turns blue when device is controlled by an IR remote.
STATUS Turns red when controlled by a keyboard and purple when IR
remote and keyboard is used at the same time.
HDD Blinks red when data is being read from or written to HDD.
MODEM Reserved for future usage.
Tx/Rx Blinks blue when network connection is functioning properly.
Guard indicator turns blue when the device is in armed status; at
this time, an alarm is enabled when an event is detected.
GUARD The indicator turns off when the device is unarmed. The
arm/disarm status can be changed by pressing and holding on the
ESC button for more than 3 seconds in live view mode.
Receiver for IR remote
Slot for DVD-R/W.
Switch to the corresponding channel in Live view or PTZ
Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback mode.
The light of the button is blue when the corresponding channel is
recording; it is red when the channel is in network transmission
status; it is pink when the channel is recording and transmitting.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Back to the previous menu.
ESC
Press for Arming/disarming the device in Live View mode.
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a
REC/SHOT
PTZ preset by pressing Numeric button.
It is also used to turn audio on/off in the Playback mode.
14