Checking The Network Status - HIKVISION DS-7100NI-SL series User Manual

User Manual of Network Video Recorder
Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup
device, please check whether it is compatible with the NVR. You can format the backup device if the format is
incorrect.
4. Click Export button to start exporting.
5. After the exporting is complete, click OK to finish the packet export, as shown in Figure 9. 33.
Up to 1M data can be exported each time.

9.4.3 Checking the Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click the Status button on the lower- right corner of the page.
Figure 9. 32 Export Network Packet
Figure 9. 33 Packet Export Attention
151