Position Sensor; Left Or Right Wrist Measurement; Alarm - Omron 705IT Instruction Manual

R7 English

Position sensor

The position sensor of your OMRON R7 can be switched ON or OFF. In the factory preset the
position sensor is enabled. If the position sensor is switched ON you can choose to have the
optimal wrist height supported by an acoustic sound (SIGNAL ON or OFF).
Position Sensor Screen Position Sensor OFF Position Sensor ON and
Screen SIGNAL OFF Screen

Left or right wrist measurement

Normally blood pressure is measured on the left wrist (factory preset). With your OMRON R7
you can choose to use the monitor either on your left or right wrist. It is recommended to use
the same wrist when for optimal comparisons of your blood pressure fluctuations.
Measuring (Wrist) Screen Measuring (Wrist) Right
Wrist Screen

Alarm

Your blood pressure monitor has the possibility to set an alarm twice a day. The alarm function
can be used to monitor your blood pressure at the same time every day or as a reminder for
pill intake.
The alarm will sound for 2 minutes. By pushing the on/off button the alarm will stop. The alarm
will not sound when the blood pressure monitor is used (e.g. for measuring or graph display) at
the moment the alarm is set.
You can set the requested hour by pushing ( ) when flashing. Press SET to lock the hour
and proceed with the minutes. By pushing the ( ) you can set the minutes. Press SET to
confirm and to proceed. Push either ( ) to enable ( ) or disable ( ) the alarm. Press
SET to lock the settings.
Alarm Screen Screen of indicating that
the alarm is sounding
15