Table of Contents
Advertisement
How to Change the Settings
Position sensor
The position sensor of your OMRON R8IT can be switched ON or OFF. In the factory preset the
position sensor is enabled. If the position sensor is switched ON you can choose to have the
optimal wrist height supported by an acoustic sound (SIGNAL ON or OFF).
Position Sensor Screen
Position Sensor OFF
Position Sensor ON and
SIGNAL OFF
Left or right wrist measurement
Normally blood pressure is measured on the left wrist (factory preset). With your OMRON R8IT
you can choose to use the monitor either on your left or right wrist. It is recommended to use the
same wrist for optimal comparisons of your blood pressure fluctuations.
Measuring (Wrist) Screen
Measuring (Wrist)
Right Wrist
Alarm
Your blood pressure monitor has the possibility to set an alarm twice a day. The alarm function can
be used to monitor your blood pressure at the same time every day or as a reminder for pill intake.
The alarm will sound for 2 minutes. By pushing the START/STOP button the alarm will stop. The
alarm will not sound when the blood pressure monitor is used (e.g. for measuring or graph display)
at the moment the alarm is set.
You can set the requested hour by pushing ( ; : ) when flashing. Press SET to lock the hour and
proceed with the minutes. By pushing the ( ; : ) you can set the minutes. Press SET to confirm and
to proceed. Push either ( ; : ) to enable (
) or disable (
) the alarm. Press SET to lock the
settings.
18
Advertisement
Table of Contents
