Playback Format - JVC SW-D7000U Instruction Manual

SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
To change displays use the left or right arrow keys to turn displays ON or OFF.
3.7.9

PLAYBACK FORMAT

The SW-D7000U can decode tapes recorded on other multiplexers. If a tape from a Dedicated
Micros, Robot or Calibur compatible multiplexer is to be Played back, the proper format must first
be selected from the SW-D7000U menus. This setting can be found in the
FORMAT
sub-menu.
NOTE: If an alternate decoding is selected, SW-D7000U tapes will not be correctly decoded,
and vice-versa.
DEFAULT: Format to decode SW-D7000U Plus recorded tapes. This is the factory default
setting.
INDICATORS: Decoding of videotapes recorded on alternative multiplexers will have indicators
as follows;
"
SW-D7000U – "JVC"
" Calibur – "CBR"
" Calibur Lite – "DM/Mini"
" Dedicated Micros – "DM/Mini"
" Robot – "ROBOT"
These indicators will appear only if the programmer or operator has selected the corresponding
menu option under
alternative multiplexers. The menu appears as follows;
If tapes cannot be decoded: If the SW-D7000U cannot decode a tape that is being Played
back, the system will display a blank screen. The fields will not be decoded or separated.
There are two possible reasons why a tape cannot be decoded:
" The tape was not recorded on a multiplexer,
" The tape is not compatible with the decoding format selected by the programmer.
In the event that the tape was actually recorded on either a SW-D7000U, compatible multiplexer
or an alternate multiplexer, but is not correctly decoded, first check to see that the correct
PLAYBACK FORMAT
38 JVC PROFESSIONAL, IMAGING PRODUCTS
sub menu PLAYBACK FORMAT
JVC
CBR
SL/DM
ROBOT
or
has been selected in the menus.
to decode tapes that were recorded on
PLAYBACK