Playback Format - JVC SW-D8000U Instruction Manual

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
This option lets you specify whether the titles are to be displayed on Monitor A and Monitor B.
You get the following pull-down menu:
To change displays use the left or right arrow keys to turn displays ON or OFF.
3.7.9

PLAYBACK FORMAT

The SW-D8000U can decode tapes recorded on other multiplexers. If a tape from a Dedicated
Micros, Robot or Calibur compatible multiplexer is to be Played back, the proper format must
first be selected from the SW-D8000U menus. This setting can be found in the
FORMAT
sub-menu.
If an alternate decoding is selected, SW-D8000U tapes will not be correctly
NOTE:
decoded, and vice-versa.
DEFAULT:
Format to decode SW-D8000U Plus recorded tapes. This is the factory default setting.
INDICATORS:
Decoding of videotapes recorded on alternative multiplexers will have indicators as follows;
q SW-D8000U – "
q Calibur – "
q Calibur Lite – "
q Dedicated Micros – "
q Robot – "
These indicators will appear only if the programmer or operator has selected the corresponding
menu option under
alternative multiplexers. The menu appears as follows;
If tapes cannot be decoded: If the SW-D8000U cannot decode a tape that is being Played
back, the system will display a blank screen. The fields will not be decoded or separated.
There are two possible reasons why a tape cannot be decoded:
q The tape was not recorded on a multiplexer,
36 JVC PROFESSIONAL, IMAGING PRODUCTS
Titles Display
Monitor A: ON
Monitor B: ON
[CANCEL]
JVC
"
CBR
"
DM/Mini
"
DM/Mini
"
ROBOT
"
sub menu PLAYBACK FORMAT
JVC
CBR
SL/DM
ROBOT
[OK]
to decode tapes that were recorded on
or
PLAYBACK