Table of Contents
Advertisement
SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
2.1
FRONT PANEL CONTROLS
The front panel contains all the operator control keys and indicators, while the video inputs, video
outputs, alarm inputs and outputs, and the remote control connections are on the rear panel.
The unit has DC 12V power and is supplied with an external AC power supply
Live
POWER
LIVE
A LT
{ F}
MULTI
SPOT
ALT
FN
ALM
ALT
Alarm
Function
Sequence
2.2
CONNECTIONS
The following instructions relate to the multiplexer only. Refer to the relevant instructions for the
associated equipment.
All the connectors are on the back-panel of your multiplexer as shown below. These connectors are:
"
9 Loop-through camera inputs with automatic termination
"
Monitor outputs for Monitor-A (BNC and S-VHS) and Monitor-B (BNC)
"
VCR input and output (BNC or S-VHS)
"
9 alarm inputs (25 pin D-sub) each of which can be normally open (NO) or normally closed
(NC)
"
RS232 and RS485 connections
The 25 pin "D-sub" connector also has the contacts for the two alarm output relays and VEXT input.
The VEXT input accepts a synchronizing pulse from your VCR (see VCR instructions). This allows
the multiplexer to follow, automatically, the time lapse speeds of the VCR if they change due to
manual changes or alarm activity.
JVC PROFESSIONAL, IMAGING PRODUCTS
FRONT PANEL CONTROLS
Record
Play
1
2
3
REC
PLAY
SEQ
ZOOM
FRZ
Zoom
Freeze
REAR PANEL CONNECTIONS
MULTIPLEXER
4
5
6
7
8
9
Camera Select Key 1-9
Arrow Key
Enter
SW-D7000U
MENU
Menu
13
Advertisement
Table of Contents
