Table of Contents
Advertisement
SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
There is a QUICKINSTALL section that gives the programmer a basic set of menu items to set up.
This allows for a quick installation setup.
The MAIN MENU section gives the programmer access to all the programmable options, in logical
sub-sections. This is described in more detail below.
NOTE:
Each section in this manual will give a description of choices that are programmable in
the MAIN MENU.
read before starting to program the options in the menus.
4.3
BATTERY BACKED-UP MEMORY FOR MENU OPTIONS
Menu option selections are automatically saved to battery backed-up memory as they are made. In
general, the battery has a 5-year shelf life and can retain memory in the unit even if the unit is
powered down for several months.
If a unit is to be powered down for any extended time (3 months or longer) then the battery should be
removed during power down, and replaced when the unit is ready to be put back into service.
Alternatively, install a new battery when a unit has been powered down for an extended time.
Contact the factory for further details on battery replacement/removal.
CAUTION:
All data will be lost if the battery is removed, and the system will revert to factory
defaults.
4.4
NAVIGATING THE FOUR MENU LEVELS
The programmer has four menu levels, designed in such a way as to make it very easy to navigate
around the menu choices. The best way to understand the menu system is to use it, with the manual
handy for reference.
In general, the ENTER key is used to go down to the next level of menu detail,
and the MENU key is used to 'escape' up to the next higher level of the menus
without making any changes.
Main Menu Level:
This is a list all sub-menus, each of which can be individually accessed by the
programmer. The sub-menus are arranged into logical menu sections. To access a
sub-menu from the MAIN MENU, use the arrow keys to select the desired section and
then press the ENTER key.
Pull-Down Menus:
Pull-Down menus are the first sub-menu levels.
available in that section, they are typically Pop-Up menus. Pull-Down menus
can be exited either by selecting EXIT and then pressing the ENTER key, or
by pressing the MENU key.
Pop-Up Menus:
Pop-Up menus are the last levels in the sub-menus. In general, use the left/right arrow
keys to enter sections in the Pop-Up menu and then use the up/down arrow keys to
make changes to the values. There are however some Pop-Up menus where the arrow
keys have additional functionality.
JVC PROFESSIONAL, IMAGING PRODUCTS
It is recommended that the corresponding section in the manual be
If additional choices are
43
Advertisement
Table of Contents
