Table of Contents
Advertisement
Setting up
9
Bobbin changing (PFAFF 3566-2/02)
.06
6
5
3
4
7
1
2
Fig. 9 - 06
Switch on machine.
Select SEWING mode.
Press threading aid key.
Remove bobbin case.
Open cover 1.
Lift latch 2 and remove bobbin case 3.
Insert bobbin in bobbin case:
Insert bobbin 4 so that it turns clockwise when the thread is pulled.
Hold bobbin firmly, pull thread into slot 5 and under spring 6 so that it comes out from
behind the spring.
Regulate the bobbin thread tension by turning screw 7.
Insert bobbin case:
Lift latch 2 and insert bobbin case 3 with bobbin into sewing hook.
Release latch 2 and push bobbin case 3 lightly to make sure it snaps in place.
Close cover 1.
Set machine ready for operation again by pressing threading aid key.
9 - 6
Advertisement
Table of Contents
