Table of Contents
Advertisement
Controls
7
Red function keys
.03.05
These keys only function in the SEWING mode.
Stop program
Interrupt sewing program
Start program
Start sewing program.
Continue program after interruption.
Cycle seam pattern forwards
Cycle seam pattern forwards step by step.
Used with the program key this starts an automatic cycle of the seam.
Guide blade
Extend/retract guide blade.
Reset key
Verify removal of error.
Threading aid
This function serves to assist threading of the needle thread.
- Work-holder bar and presser foot are raised.
- Sewing start is inhibited.
Cycle seam pattern backwards
Cycle seam pattern backwards step by step.
Used with the program key this starts an automatic cycle of the seam.
Basic position
The machine is set at its basic position.
7
Green function keys
.03.06
These keys only function in the INPUT mode.
Program selection
When this function is enabled (diode lights up) a stored program can be selected using the
number keys or the plus/minus keys.
Automatic station change
When this function is enabled (diode lights up) the program station is changed
automatically from A to B after every sewing cycle.
Seam-pattern programming
When this function is enabled (diode lights up) a seam pattern can be made up or edited.
See Chapter 10.05 Making up and editing seam patterns.
7 - 4
Advertisement
Table of Contents
