Programming
10
Programming
10
Brief explanation of inputs
.01
The functions selectable in the INPUT mode are either direct functions or menu
functions.
10
Direct functions
.01.01
Direct functions are needed frequently and can be selected direct with the corresponding
key.
Program station A
Program station B
Program selection
Automatic program change
Seam pattern programming
When this function is enabled, the following functions can be selected direct:
10 - 1
Basting seam
Angle seam
Engaging depth
Start backtack
Stitch condensation at beginning of seam
Finish backtack
Stitch condensation at end of seam