Scanning - Uniden MHS050 Owner's Manual

Operation

Scanning

The MHS050 can scan the channels programmed into memory, see
One-touch Channel - 2
Programming Scan Channels on page 20.
To initiate scanning;
1. Assuming the unit is on CH17 when switched on.
2. Press (scan) and scanning starts. SCAN icon
LO
appears during scanning.
The MHS050 will scan memory channels in ascending order.
If Triple Watch is turned on during scan then the radio will scan the
memory channels in ascending order and will check channel 09 and
channel 16 every 2 seconds, then resume scanning the memory channels.
Triple Watch - 2
LO
Monitor
UNIDEN MHS050
LO
TRI
19
Handheld VHF Marine Transceiver
LO TRI
Scanning
Mem
SCAN MEM MEM
LO LO
Triple Watch - 3
LO TRI
Lock
LO
LOCK