Power Save; Back Lighting; Monitor - Uniden MHS050 Owner's Manual

Operation
Triple Watch - 1

Power Save

Battery Save feature extends the battery life by switching the receiver
circuit power ON and OFF. This feature automatically activates during
standby mode (RX mode without signal).

Back Lighting

LO
The Liquid Crystal Display (LCD) is backlit for easy viewing at night or in
low light situations. The back lighting automatically switches ON every
time a key (except PTT and BOOST) is pressed. It turns OFF 10 secs
after the last key is pressed.

Monitor

Mem
1. Press (MON) to start monitoring one channel
with fixed (open) squelch.
2. Press and hold (MON) for 2 seconds to hold
the monitor status on. All channel indicators
will start to flash.
LO
3. Press (MON) key again to release the
monitoring status.
Monitor is not available in scan mode or triple watch mode.
NOTE
UNIDEN MHS050
TRI
MEM
Triple Watch - 2
Monitor
21
Handheld VHF Marine Transceiver
LO TRI
LO