Attaching The Beltclip; Using The Carabiner Clip; Charging The Battery Pack - Uniden MHS050 Owner's Manual

Getting Started

Attaching the Beltclip

To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
To remove the belt clip, press and hold belt clip locker, slide the belt clip
at the same time until released.

Using the Carabiner Clip

Use the carabiner clip to conveniently secure the MHS050 to a belt or strap.
The MHS050 will float when the carabiner clip is not
connected and the battery cover securely fastened.
NOTE

Charging the Battery Pack

Your radio includes charging cradle and rechargeable battery pack.
Follow these instructions to recharge the radio in the charging cradle.
For the initial battery charge, make sure the
radio is off for optimum charging.
NOTE
1. Connect the adapter's plug to DC IN 12V jack
of the charging cradle and plug the other end into
an AC outlet.
2. Set the charging cradle on the desk or tabletop, and
place the radio in the charging cradle with the keypad
facing forward.
3. Make sure that the LED illuminates. Charge the battery
pack for 13 hours and remove the radio from the
charging cradle after charging.
UNIDEN MHS050
9
Handheld VHF Marine Transceiver
(single charger shown)