Connecting To A Leit-2Et Via Find; Turn Off Handset; Initial Leit-2Et Connecting - DIG LEIT RC2ET Operating Instructions Manual

2.5 Connecting to a LEIT-2ET via FIND

The FIND icon quickly connects to a LEIT-2ET controller that has been
accessed with the handset previously. This option allows easy identification
and connection to the last ten (10) controllers on the system that have been
communicating with the handset. The FIND screen also provides an address
or description (if entered in CONT. SETUP) making it easy to identify the
controller location.
Press to navigate down to FIND icon and press
screen. In the FIND screen, the last connected controller ID is blinking. To
select another controller ID to connect to, press
the ten (10) saved CONTROL IDs (if available). After the CONTROL ID has been
10:00 10:00 10:00
selected, press to connect. After linking to a LEIT-2ET controller, controller
status information can be reviewed if available. Press
800-322-9146
760-727-0914
Controller Menu appears for programming and reviewing.
WWW.DIGCORP .COM
MAIN MENU HELP HELP
10:00 10:00 10:00
CONTROL ID: XX
10:00 10:00 10:00
DESCRIPTION
MAIN MENU FIND FIND
800-322-9146
10:00 10:00 10:00
760-727-0914
WWW.DIGCORP .COM
MAIN MENU HELP HELP

2.6 Turn Off Handset

TURN OFF
10:00 10:00 10:00
Press the and then to select TURN OFF icon. When TURN OFF icon is
MAIN MENU TURN OFF TURN OFF
highlighted, press to turn off the handset. If the handset is left on, it will
CONTROL ID: XX
DESCRIPTION
turn off automatically after ten (10) minutes.
MAIN MENU FIND FIND
10:00 10:00 10:00
TURN OFF
MAIN MENU TURN OFF TURN OFF
to enter the FIND
or and scroll through
to review until the
10:00 10:00 10:00
CONNECTING CONNECTED
ARE YOU SURE?
YES / NO CONNECT CONNECT
10:00 10:00 10:00
CONNECTING CONNECTED
ARE YOU SURE?
YES / NO CONNECT CONNECT
14
3.

Initial LEIT-2ET Connecting

In order to begin communication with a new LEIT-2ET controller using the
handset, a series of initial setup steps must be undertaken. First, the user
connects to the LEIT-2ET controller via CONTROL ID 00 DEFAULT SETUP.
After connecting to a LEIT-2ET controller, the user must assign the controller
a new CONTROL ID (recommended ID # 2-99). At this stage the user can also
change the existing CLIENT ID of the controller (controller default CLIENT ID is
AAA) as long as it is also changed on the handset after exiting the controller
program. In addition a descriptive controller address or name can be assigned
to the controller with up to fourteen (14) characters to uniquely identify the
location of each LEIT-2ET controller on the system.
10:00 10:00 10:00
CONTROL ID: 00
NO DESCRIPTION
MAIN MENU RADIO UPLINK RADIO UPLINK
10:00 10:00 10:00
CONNECTED UPLOADING
CONTROL ID: XX
NO DESCRIPTION
CONNECT CONNECTED TO CONNECT
10:00 10:00 10:00
CONNECTING
UPDATE
SUCCESSFUL
CONNECT CONNECT CONTROLLER MENU
10:00 10:00
ARE YOU SURE? CONNECTING
YES / NO CONNECT
10:00 10:00
ARE YOU SURE?
CONTROL ID: 01
NO DESCRIPTION
CLIENT ID: AAA
CONT. SETUP YES / NO
15