Connecting To A Leit-2Et Via Find; Turn Off Handset - DIG LEIT RC2ET Instruction Manual

2.5 Connecting to a LEIT-2ET via FIND

The FIND icon quickly connects to a LEIT-2ET controller that has been
accessed with the handset previously. This option allows easy identification
and connection to the last ten (10) controllers on the system that have been
communicating with the handset. The FIND screen also provides an address
or description (if entered in CONT. SETUP) making it easy to identify the
controller location.
Press to navigate down to FIND icon and press
screen. In the FIND screen, the last connected controller ID is blinking. To
select another controller ID to connect to, press
the ten (10) saved CONTROL IDs (if available). After the CONTROL ID has been
10:00 10:00
selected, press
status information can be reviewed if available. Press
Controller Menu appears for programming and reviewing.
MAIN MENU
10:00 10:00
10:00 10:00
MAIN MENU
10:00 10:00
MAIN MENU

2.6 Turn Off Handset

10:00 10:00
Press the and then
MAIN MENU TURN OFF
highlighted, press
turn off automatically after ten (10) minutes.
MAIN MENU
10:00 10:00
MAIN MENU TURN OFF
10:00
to connect. After linking to a LEIT-2ET controller, controller
800-322-9146
760-727-0914
WWW.DIGCORP .COM
HELP HELP
10:00
CONTROL ID: XX
10:00
DESCRIPTION
FIND FIND
800-322-9146
10:00
760-727-0914
WWW.DIGCORP .COM
HELP HELP
TURN OFF
10:00
to select TURN OFF icon. When TURN OFF icon is
TURN OFF
to turn off the handset. If the handset is left on, it will
CONTROL ID: XX
DESCRIPTION
FIND FIND
10:00
TURN OFF
TURN OFF
to enter the FIND
or
10:00 10:00
ARE YOU SURE?
YES / NO
10:00 10:00
ARE YOU SURE?
YES / NO
14
and scroll through
to review until the
10:00
CONNECTING CONNECTED
CONNECT CONNECT
10:00
CONNECTING CONNECTED
CONNECT CONNECT