Table of Contents
Advertisement
10:00
10:00
10:00
6. Wind Speed Setup:
Wind speed setting can be programmed to shut down the irrigation system at
CONTROLLER MENU
ENVIRONMENT
wind speeds from 8 to 25 miles per hour (3.5 - 11.1 m/s).
10:00
10:00
10:00
In the ENVIRONMENT menu screen navigate and highlight the WIND SENSOR
icon. Press
again to connect. CONNECTED will appear momentarily and
JAN
100%
MAY
100%
SEP
then the WIND SENSOR screen appears with SET WIND OFF: NOT ACTIVE,
FEB
100%
JUN
100%
OCT
MAR
100%
JUL
100%
NOV
blinking. Press
or
to select the wind speed value to shut off irrigation.
APR
100%
AUG
100%
DEC
BUDGET
BUDGET
When finished, press
to download the new information. ARE YOU SURE?
10:00
10:00
screen will appear with YES. Press
CONNECTED
UPDATE
The UPDATE SUCCESSFUL message appears confirming that the controller
SUCCESSFUL
accepted the new information and then the ENVIRONMENT screen appears
again.
CONNECT
CONNECT
10:00
10:00
10:00
CONTROLLER MENU
ENVIRONMENT
WIND SENSOR
10:00
10:00
10:00
ARE YOU SURE?
DOWNLOADING
SET WIND OFF:
8 mph
WIND SENSOR
YES / NO
10:00
10:00
10:00
ENVIRONMENT
EXIT
CONTROLLER MENU
10:00
10:00
UPLOADING
CONNECTED
BUDGET
CONNECT
CONNECT
10:00
10:00
ARE YOU SURE?
DOWNLOADING
100%
100%
100%
100%
CONNECT
BUDGET
YES / NO
again to download the information.
10:00
10:00
UPLOADING
CONNECTED
CONNECT
CONNECT
10:00
10:00
CONNECTED
UPDATE
SUCCESSFUL
CONNECT
CONNECT
CONNECT
44
CONTROLLER MENU
ENVIRONMENT
WIND SENSOR
10:00
10:00
10:00
7. Exit Environment Menu:
ARE YOU SURE?
DOWNLOADING
In the ENVIRONMENT menu screen, highlight the EXIT icon. Press
SET WIND OFF:
ENVIRONMENT screen and the CONTROLLER MENU screen appears. If the
8 mph
handset is left on, it will turn off automatically in ten (10) minutes.
WIND SENSOR
YES / NO
10:00
10:00
10:00
ENVIRONMENT
EXIT
CONTROLLER MENU
8.
General Information for Handset and Controller
1) The LEIT-2ET wireless irrigation controller needs adequate light to maintain proper
function. At low light levels the radio will periodically turn off to guarantee correct
controller operation. When the radio is off, less power is used and the radio can turn
itself on again when sufficient light has charged the controller to adequate levels.
2) The radio will function better if the controller is located at higher elevation. If there
is a choice do not situate the controller in a hollow area.
3) To communicate, the controllers and handsets MUST have the same CLIENT ID Code.
This is the user's unique identification code, which prevents interference from other
users in the area.
4) If two controllers are set to the same ID, communication may be disrupted if both
controllers are in range of the handset. The same occurs if two handsets are set
to the same ID and are in use at the same time. All controllers and handsets in the
same group must have a unique ID. (We recommend setting controller and handset
starting from #2.)
5) The handset needs to be kept in a charged state. After 500-1,000 charge cycles the
internal batteries may need replacement.
IMPORTANT: Communication between the LEIT RC2ET handset and the LEIT-2ET controller
is automatically limited to daylight hours between 8 AM to 5 PM, when there is sufficient
light energy. Longer bright light days will enable the radio to operate automatically over
longer parts of the day, into the evening.
CONNECT
CONNECT
10:00
10:00
CONNECTED
UPDATE
to exit
SUCCESSFUL
CONNECT
CONNECT
CONNECT
45
Advertisement
Table of Contents
