Table of Contents
Advertisement
blink. Press
and select Monday. A symbol appears blinking above M.
To skip this day, press the
again. Press
to move to the next day. Press
to repeat the steps for setting additional
watering days. Press
and the next screen appear with START TIME screen,
PROGRAM A and OFF in start #1 blinking.
START TIME: Up to four (4) start times are available, including AM or PM.
To program the first start time, set the hour digit including AM or PM using
or
. To select the minute digit, press
the minute. Press
again and repeat the steps for setting start times 2, 3
and 4 or press
and the DURATION screen appears with PROGRAM A and
DURATION Valve #1 with the hour digit blinking. Set from one (1) minute to up
to five (5) hours and fifty-nine (59) minutes in one (1) minute increments.
Use the same steps to set duration for Valve #1 and Valve #2. In programming
Valve #2, the user has the additional option of attaching Valve #2 to Valve #1
if hydraulic limitation is not exceeded. Using this feature both valves will open
and close at the same time. To set the Valve #2 to operate with Valve #1 in
a group, in Valve #2 press
or
to select and a screen will appear with information on the NEXT SCHEDULED
START TIME. Press
to download the new information. The ARE YOU
SURE? screen appears. Press
to connect and if successful the UPDATE
SUCCESSFUL message appears, then the PROGRAM MENU screen appears.
To exit, select EXIT icon and press
10:00
10:00
10:00
A
CONTROLLER MENU
PROGRAM
PROGRAM MENU
10:00
10:00
10:00
PROGRAM: A
CONNECTED
1
SELECT DAYS
2
X _ _ X X _ _
3
M T W T F S S
4
CONNECT
SELECT DAYS
START TIME
to select (M) for Monday and
and repeat the steps of setting
until GROUP appears blinking. Press
.
10:00
10:00
B
A
B
UPLOADING
PROGRAM A
CONNECT
10:00
10:00
PROGRAM: A
PROGRAM: A
ARE YOU SURE?
9:00 AM
00:00
10:00 AM
11:00 AM
00:00
OFF
22
DURATION
YES / NO
CONTROLLER MENU
PROGRAM
PROGRAM MENU
10:00
10:00
10:00
PROGRAM: A
CONNECTED
1
SELECT DAYS
2
X _ _ X X _ _
3
M T W T F S S
4
CONNECT
SELECT DAYS
START TIME
10:00
10:00
10:00
DOWNLOADING
CONNECTED
SUCCESSFUL
CONNECT
CONNECT
CONNECT
4.2 Controller Setup Options
Using the SETUP icon and entering the SETUP MENU screen, the user can
select the TIME & DATE icon to update the handset time and date, or select
CONT. SETUP icon to change CONTROL ID, CLIENT ID numbers and add an
address or name for ID verification. Use the RAIN STOP icon to set a rain delay
and select EVENT OFF or MONTH OFF icon to turn off any day or any month
of the year. The information in SETUP MENU can be updated or changed as
needed.
1. Set Controller Time and Date
IMPORTANT: This screen must be used to download the handset time and
date to the controller.
In the CONTROLLER MENU screen, press
icon. Press
to enter SETUP MENU screen. In the SETUP MENU screen
highlight the SET TIME/DATE icon and press
screen. Press
again, ARE YOU SURE? screen appears. Press
to download the information to the controller. If the time and date setup is
completed the UPDATE SUCCESSFUL message appears. Then Setup Menu
appears again.
PROGRAM A
CONNECT
10:00
10:00
PROGRAM: A
PROGRAM: A
ARE YOU SURE?
9:00 AM
00:00
10:00 AM
11:00 AM
00:00
OFF
DURATION
YES / NO
UPDATE
and
to highlight the SETUP
to enter the TIME/DATE
again
23
Advertisement
Table of Contents
