Advertisement
CARE
&CLEAFIIHG,
(ore.
MAINTENANCE OVEN
L,GHT
OVEN
WINDOW
TO PROTECT THE OVEN
OVEN DOOR
DOORWINDOW:
> Disconnect power to range
1. Do not use abrasive cleaning
beforereplacinglightbulb.
agentssuchas steel wool scouring
> Use a dry potholderto prevent
pads or powdered cleansers as
> Do notplace excessiveweighton
possible harm to hands when
they may scratchthe glass.
or stand on an open oven door.
replacingbulb.
This could causethe rangeto tip
2. Do not hit the glasswith pots,pans,
over,breakthe door,or injurethe
> Be sure bulb is cool before
furniture,toys or other objects.
user.
touchingbulb.
3. Do not closethe dooruntilthe oven
> Do not attemptto open or close
> Do not touch hot bulb with a
racks arein place.
dooror operateoven untildooris
damp cloth as this may cause
properlyreplaced,
the bulb to break.
Scratching,hitting,jarring or stressing
the glass may weaken its structure
> Never place fingers between
causingan increasedrisk of breakage
hinge and front oven frame,
at alaterdate.
Hingearms are spring mounted.
_ULBCovER
If accidentallyhit, the hinge will
__
slam shut against oven frame
"
LEVELINGLEGS
andcould injureyourfingers.
_ ' '
TO REMOVE:
RE_,*,NER
> Be surethe anti-tipbracketse-
1. When cool,open the oven doorto
TO REPLACEOVENLIGHTBULB:
cures one of the rear leveling
the firststop position(openedabout
legs to the floor to preventthe
four inches).
1. Whenoven is cool, hold bulb cover
rangefrom accidentally tipping.
in place,then slidewire retaineroff
2. Graspdoor at each side. Do not
cover.NOTE: Bulb cover will fall
The rangeshould be leveledwhen in-
usethe door handleto lift door.
if not held in place while remov-
stalled. If the range is not level, turn
3. Liftupevenlyuntildoorclearshinge
ing wire retainer,
the plastic leveling legs, located at
arms.
2. Removebulb coverand light bulb.
eachcornerof the range,untilrangeis
level.
3. Replacewith a 40-watt appliance
TO REPLACE:
bulb.
1. Graspdoor
_:
at each side.
4. Replacebulbcoverand securewith
_._
_ :
wire retainer.
_
2. Align slots in
_,,"
--
the doorwith the hingearmsonthe
5. Reconnectpower to range. Reset
_
_AANTI-TIPBRACKET
range,
clock.
_"
_'LEVELING
LEG
3. Slidethe door downonto the hinge
arms until the door is completely
seatedon the hinges.Push down
on the top corners of the door to
completely seat door on hinges.
Doorshouldnot appearcrooked.
NOTE:Theoven dooron a newrange
may feel "spongy"when it is closed.
This is normal and will decreasewith
use.
15
Advertisement
