Advertisement
ENAMEL
(PAINTED)
METAL
FINISHES
NOTE:Neveruseovencleaners,abra-
SIDEPANELS, S TORAGE DRAWER &
TRIMPARTS
sive or caustic liquid or powdered
DOOR H ANDLES
> Washwith soap and water,a glass
cleansers on plastic finishes. These
> Whencool,washwith warm,soapy
cleaner,or mild liquidsprays,such
cleaningagentswill scratchor mar fin-
water,rinse and dry. Neverwipe a
as Fantastik*or Formula409*.
ish.
warm or hot surface with a damp
> To preventscratchingor dulling of
NOTE: Topreventstainingor discolor-
clothas this may damagethe sur-
the finish, do not use mildly abra-
ation, wipe up fat, greaseor acid (to-
face and maycausea steamburn.
sive, abrasive, harsh or caustic
mato,lemon, vinegar,milk, fruit juice,
> For stubbornsoil, use mildlyabra-
cleanerssuchas oven cleaners,
marinade)immediatelywith a dry pa-
sive cleaningagents suchas bak-
OVEN
INTERIOR
per towel.
ing sodapasteor BonAmi*. Do not
useabrasivecleanerssuchas steel
> Followinstructionson pages12-13
wool pads or oven cleaners.These
for Self-Cleaning Oven
SEALED GAS BURNERS
productswill scratchor permanent-
ly damagethe surface.
OVEN RACKS
NOTE: Use dry towel or cloth to wipe
> Cleanwith soapywater.
> Clean frequently.Allow burner to
cool. Clean with soap and plastic
up spills, especially acidic or sugary
> Removestubbornsoil with cleans-
scouring pad. For stubborn soils,
spills. Surface may discolor or dull if
ing powder or soap-filledscouring
clean with a soap-filled,nonabra-
soilis not immediately removed.Thisis
pad. Rinseand dry.
sive pad.Try to preventthe cleaner
especiallyimportantfor whitesurfaces.
Racks will permanentlydiscolor and
from seepingintothe gas ports as
may not slide smoothlyif left in the
this will affect the flame. If the
GLASS
oven during a self-cleanoperation.If
cleanerdoes enter the ports,clean
OVEN W INOOW
& DOOR
this occurs, wipe the rack and
with a soft bristlebrushor a straight
> Avoidusing excessiveamountsof
embossedrack supportswith a small
pin, especiallythe port below the
water which may seep under or
amount of vegetable oil to restore
ignitor. Do not enlarge or distort
behindglasscausingstaining,
ease of movement, then wipe off
holes.
> Wash with soap and water. Rinse
excessoil.
> Be careful not to get water into
with clear water and dry. Glass
burnerports.
cleanercan beusedif sprayedon a
PLASTIC FINISHES
Usecare when cleaningthe ignitor.
clothfirst.
TRIM& ENDCAPS
If the ignitoris wet or damagedthe
> Do not useabrasivematerialssuch
> When cool, clean with soap and
surfaceburnerwill not light.
as scouring pads, steel wool or
water,rinse and dry.
powdered cleaners as they will
> Use a glass cleaner and a soft
scratchglass,
cloth.
* Brandnames for cleaning products areregistered trademarks o f the respective manufacturers.
** Toorderdirect,call1-800-688-8408.
li
Advertisement
