Table of Contents
Advertisement
Section 2 - Overview
Equipment Requirements
Cables
HSL highly recommends you use HSL Cable Kits for your Switch to
help ensure superior security and performance. These cables offer
the highest quality possible to ensure optimal data and video
transmission.
One Cable Kit is required per connected computer.
Smart Cables from Belkin enables video conversion from computer
VGA output to DVI-D KVM input to enable legacy video mix with
newer DVI computers and display.
Note (K202B only): If VGA display will be used then all computers
must be connected through VGA interface. If one computer is VGA
only then all other computers must be connected through VGA and
display must support DVI-I or VGA.
How to order?
To connect:
Use:
Computer keyboard,
KVM Cable short (1.8 m),
mouse, DVI-D single-link
DVI-D to DVI-D Single-Link,
display
USB, Black
Computer VGA video
KVM Cable short (1.8 m),
output (K202B only)
DVI-A to VGA, USB, Black
Computer audio output
KVM Cable short (1.8 m),
Audio Out, Black-Green
K202B/D Secure KVM Switch User Manual
Computer VGA output
(display and other
computers are DVI)
KVM DVI-I video output
to VGA only display
(K202B only)
Important: The use of cables other than those provided by HSL is
not recommended. Use of other cables may affect system security,
may permanently damage the product and may void product
warranty.
Order No.
CPN05485
CPN05489
CPN05490
6
KVM Smart-Cable VGA PC to
CPN06011
DVI KVM converter cable
with USB type A to USB type
B, 6ft (1.8 m), black
DVI-I to VGA display adapter
CPN05492
Advertisement
Table of Contents
