HighSecLabs K404F User Manual

HighSecLabs K404F User Manual

Combiner kvm switches

Advertisement

Secure Combiner KVM Switch User Manual
User Manual: Combiner KVM Switches (K404F, K424F)

User Manual

Models covered in this user manual:
K404F: Secure 4-port DVI Combiner KVM Switch w/audio & DPP
K424F: Secure 4-port Dual-Head DVI Combiner KVM Switch w/audio & DPP
Rev: 2.4
1

Advertisement

Table of Contents
loading

Summary of Contents for HighSecLabs K404F

  • Page 1: User Manual

    Secure Combiner KVM Switch User Manual User Manual: Combiner KVM Switches (K404F, K424F) User Manual Models covered in this user manual: K404F: Secure 4-port DVI Combiner KVM Switch w/audio & DPP K424F: Secure 4-port Dual-Head DVI Combiner KVM Switch w/audio & DPP Rev: 2.4...
  • Page 2: Table Of Contents

    Secure Combiner KVM Switch User Manual Table of Content Record of Revisions Introduction ..................3 Package Contents ................3 Security Features ................4 Date Description of changes Main Features ..................6 Nov 11, 2010 Initial release Equipment Requirements ..............7 Nov 20, 2011 Internal review for CC evaluation Safety Precautions ................
  • Page 3: Introduction

    This User Manual provides all the details you’ll need to install and contact us immediately in one of the following ways: operate your new Switch, in addition to troubleshooting guidance—  in the unlikely event of a problem. Web form: http://www.highseclabs.com/support/case/  Email: security@highseclabs.com  Tel: +972-4-9591191 or +972-4-9591192 Important: This product is equipped with always-on active anti- tampering system.
  • Page 4: Security Features

    Secure Combiner KVM Switch User Manual Security Features EDID Emulation and Firewall HSL Secure KVM Switch is the most advanced and secure HSL Secure KVM Switch blocks the computer access to the shared commercially available KVM Switch available today. This product is a display by using isolated EDID emulators.
  • Page 5 Secure Combiner KVM Switch User Manual High Inter-Channel Analog Isolation HSL Secure KVM Switches offers exceptionally high isolation between computer channels to prevent analog leakages across the KVM. Dedicated Peripheral Port HSL patented Dedicated Peripheral Ports enables secure use of CAC or smart-card readers leveraging security.
  • Page 6: Main Features

    Secure Combiner KVM Switch User Manual Advanced Scaling Function Main Features The HSL Secure KVM Combiner has an advanced scaling function The HSL Secure KVM Switch was designed with the user in mind for allowing the user to scale the video source 2x and 4x smaller to assure today’s IT environment.
  • Page 7: Equipment Requirements

    Secure Combiner KVM Switch User Manual Notes: Equipment Requirements a. Console USB keyboard and mouse ports are switchable, i.e. Cables you can connect keyboard to mouse port and vice versa. However, for optimal operation it is recommended to It is highly recommended to use HSL Cable Kits for product to ensure connect USB keyboard to console USB keyboard port and optimal security and performance.
  • Page 8: Safety Precautions

    Secure Combiner KVM Switch User Manual Safety Precautions Please read the following safety precautions carefully before using the product: The product has obvious signs of breakage or Before cleaning, disconnect the product from DC loose internal parts. power. The product should be stored and used only in Be sure not to expose the product to excessive temperature and humidity controlled environments humidity.
  • Page 9: Front Panel Features

    Secure Combiner KVM Switch User Manual Front Panel Features 1 – Steel enclosure 2 – DPP (Dedicated Peripheral Port) Status LED ("Freeze") 3 – DPP channel select LEDs 4 – Channel Select push-buttons and LEDs 5a-5b – Holographic Tamper Evident Labels...
  • Page 10: Rear Panel Features

    Secure Combiner KVM Switch User Manual Rear Panel Features Model shown K424F Console Area Computer Area 1 - DPP (Dedicated Peripheral Port) console USB jack 7 - Computer USB Keyboard & Mouse jack 2 - RDC remote control port RJ-45 (for future use) 8 - Computer audio input jack 3.5mm stereo 3 –...
  • Page 11: Tamper Evident Labels

    Secure Combiner KVM Switch User Manual Tamper Evident Labels HSL Secure KVM Switch uses 4 holographic tamper evident labels to provide visual indications in case of enclosure intrusion attempt. These labels indicate white dots or the text “VOID” once removed. When opening product packaging inspect the 4 tampering evident labels.
  • Page 12: Product Specifications

    PC CAC Ports USB Type-B jack No. of Computers Supported PC Audio Input 3.5mm stereo jack Displays Supported PC Video Input Port DVI-D Single-link female K404F: 1 x single-link DVI-D display; Port Selectors push-buttons HDMI interface supported with adapter LED Indicators...
  • Page 13 Secure Combiner KVM Switch User Manual  Colored Task-bar and window border indicating channel.  Mouse wheel cyclic toggling between active windows in system mode.  Double click to maximize a window to a full screen.  Legacy mode – toggling between windows by keyboard Control + Function keys [Optional].
  • Page 14: Before Installation

    Secure Combiner KVM Switch User Manual • Some projects invested significant resources in the overall project Before Installation design and implementation but neglected the display and peripherals. Users may reject the new system if proper display not Unpacking the Product used with the system.
  • Page 15 Secure Combiner KVM Switch User Manual Dual Display Model K424F • K424F uses two displays. It is preferable that both displays will be the same type and model. • Displays must be landscape oriented and installed side by side in close proximity to one another.
  • Page 16: Installation

    Secure Combiner KVM Switch User Manual classical keyboard (HID) operation will be functional. It is Installation recommended to use standard USB keyboards. 4. Console USB mouse port supports Standard KVM Extender Connecting devices to product console composite device having a keyboard/mouse functions. Product requires connection of all devices and computers prior to powering it up.
  • Page 17 Secure Combiner KVM Switch User Manual When you power up your computers, the product emulates display, If the USB device is detected but not authorized, as not being a mouse and keyboard on each port and allows your computers to boot Smart Card or CAC reader, it will be rejected for security reasons.
  • Page 18 Secure Combiner KVM Switch User Manual Typical system diagram...
  • Page 19: Administrator Setup

    Secure Combiner KVM Switch User Manual Administrator Setup Note about input resolution setting: Selection of input resolution that does not match the attached PC will result unreadable image at Now that the Secure Combiner KVM is connected and powered-on that window. This may be fixed by entering administrator mode and it is a good opportunity to setup some operational settings.
  • Page 20 Secure Combiner KVM Switch User Manual 4. Check that each window is coupled to the proper audio output (if applicable). 5. Check that all video cable thumb screws are secured. 6. Check that administrator key was removed from the device. Dual Display Channel #1 Input resolution setting window Installation is similar to a single display with the following changes: 1.
  • Page 21: Operation

    Secure Combiner KVM Switch User Manual Operation Now that you have connected your console and computers to the Switch, it is ready for use. Default channel after power up is channel #1 as indicated by channel select LED #1 illumination. You can select which computer you wish to control by one of the following methods: Default Channel After product boots up, the default active channel will be channel...
  • Page 22 Secure Combiner KVM Switch User Manual...
  • Page 23: Dpp Operation

    Secure Combiner KVM Switch User Manual Normal Mode DPP Operation The Secure Combiner KVM enables simultaneous interaction with 2- The product is equipped with DPP port enabling connectivity to 4 different computers using a single or dual display, keyboard and external USB-devices such as smartcard reader.
  • Page 24 Secure Combiner KVM Switch User Manual • Pressing + / - (on the side of the mouse) mouse buttons will toggle • Left clicking on a window will bring it to the front and make it the the Secure KVM to System Mode. active window.
  • Page 25 Secure Combiner KVM Switch User Manual Moving Between Windows in Normal Mode Help button When in normal mode moving between windows can be done either The “?” button located at the task bar (see figure below) show mouse by switching to system mode (by pressing the mouse side buttons), functionality bitmap with mouse functions.
  • Page 26 Secure Combiner KVM Switch User Manual Dual display operation [K424F] quarter of the available screen area). Tile is actual a preset of system mode and once in tile mode all system mode functions are available. Maximizing a window When in system mode, double-clicking on a window will maximize that window to full screen.
  • Page 27: Single Display Viewing Options

    Secure Combiner KVM Switch User Manual Single Display Viewing Options...
  • Page 28 Secure Combiner KVM Switch User Manual...
  • Page 29: Dual Display Viewing Options

    Secure Combiner KVM Switch User Manual Dual Display Viewing Options...
  • Page 30: Summary Of Actions

    Secure Combiner KVM Switch User Manual Summary of Actions...
  • Page 31 Secure Combiner KVM Switch User Manual...
  • Page 32: Troubleshooting Guide

    Replace cable if needed. If problem persists, contact contact us immediately in one of the following ways: your system administrator or our technical support.  Web form: http://www.highseclabs.com/support/case/  Email: security@highseclabs.com Product enclosure appears disrupted or all channel- Problem: ...
  • Page 33 Secure Combiner KVM Switch User Manual Keyboard Mouse Problem: Mouse and keyboard are not working (two channels) Problem: Mouse cursor does not switch from primary to secondary display. Solutions: Solutions: Driver supporting multiple displays was not installed or  Check that computer USB and video cables are not crossed not installed properly on computer.
  • Page 34 Secure Combiner KVM Switch User Manual  Video With everything connected, power-cycle the product to reset the video. Make sure the Video Diagnostic LED is solid green. Problem: No video image in user display (all channels)  Check that the displays that you are using support the Solutions: resolution and refresh-rate setting on computer.
  • Page 35: Copyright And Legal Notice

    Secure Combiner KVM Switch User Manual Copyright and Legal Notice © 2015 High Sec Labs Ltd. (HSL) All rights reserved. This product and/or associated software are protected by copyright, international treaties and various patents. This manual and the software, firmware and/or hardware described in it are copyrighted.

This manual is also suitable for:

K424fK502K524eK504K504e

Table of Contents