Position Markers; Vehimarker And Lock-On-Road - Uniden IGO500 Owner's Manual

Field
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The
accurate time comes from the GPS satellites, and the time zone
information comes from the map or it can be set manually in
Regional settings.
(The current time is always displayed in the top left corner of the
high level menu screens.)
Default data fields when navigating a route (tap and hold any of the fields to
change its value):
Field
Shows the distance you need to travel on the route before
reaching your final destination.
Shows the time needed to reach the final destination of the route
based on information available for the remaining segments of the
route. Historical traffic data or traffic patterns are also taken into
account whenever such information exists.
Shows the estimated arrival time at the final destination of the
route based on information available for the remaining segments
of the route. Historical traffic data or traffic patterns are also
taken into account whenever such information exists.

2.3.2 Position markers

2.3.2.1 Vehimarker and Lock-on-Road

When your GPS position is available, the software marks your current position
with the Vehimarker. By default, this marker is a blue arrow, but you can change
this icon in Settings.
Page 22
Description
Description