Entering The Coordinate Of The Destination - Uniden IGO500 Owner's Manual

to select a different destination.
5. After a short summary of the route parameters, the map appears showing
the entire route. The route is automatically calculated. Tap
modify route parameters, or tap

3.1.7 Entering the coordinate of the destination

You can also select a destination by entering its coordinate.
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Open the
4. You can enter the latitude and longitude values in any of the following formats:
decimal degrees; degrees and decimal minutes; or degrees, minutes and
decimal seconds.
5. (optional) If necessary, tap
Page 70
tab and tap
then
and start your journey.
to return to the Navigation menu.
.
.
and enter the
to