Table of Contents
Advertisement
How Do I Use It?
• While driving without an active route in TRAX353: Smart
Zoom will zoom in if you drive slowly and zoom out to the limit
set here when you drive at high speed.
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap
enable Smart Zoom.
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear, and then tap and hold
to open the Smart Zoom Settings window. Modify the zoom limits of
Smart Zoom if necessary.
Position markers
Current GPS position and Lock-on-Road
When your GPS position is available, TRAX353 marks your current
position with the
marker depends on the vehicle type used for route calculation.
The vehicle type can be selected in Route settings (page 93) or in the
Quick Menu (page 89).
• If you choose pedestrian: The
The direction of the icon shows your actual heading.
• If you choose any of the vehicles: The
nearest road to suppress GPS position errors. The direction of the icon is
one of the directions of the route.
To use the current GPS position, tap
and you can save the GPS position as one of the following:
• a Favourite
• a Road Safety Camera
• a POI
• a map marker Pin
Page 34
icon on the map. The exact location of the position
icon is at your exact GPS position.
icon is aligned to the
. The Position menu appears
to
Advertisement
Table of Contents
