Navigating; Selecting The Destination Of A Route - Uniden IGO500 Owner's Manual

3 Navigating

When first started, the software calculates routes using the road network of the
high quality vector maps provided with the product.
You can set up your route in different ways:
• If you need a route for immediate navigation, you can select the destination
and start navigating to it right away (normal navigation).
• You can also plan a route independently of your current GPS position or even
without GPS reception (to achieve this, you need to turn off the GPS receiver
and set a new starting point in My Route / Edit Route by tapping the flag icon
at the current position).
You can plan routes with multiple destinations. Select the first destination. Then
select a second destination ad add it to your route to create a multi-point route.
You can add as many destinations to your route as you like.
You can also use the software for off-road navigation. For details, see page 68.

3.1 Selecting the destination of a route

The software offers you several ways of choosing your destination:
• Enter a full address or a part of an address, for example a street name without
a house number or the names of two intersecting streets (page 44).
• Enter an address with postal code (page 48). This way you do not need to
select the name of the settlement and the search for street names might be
faster as well.
• Use a built-in Place of Interest as your destination (page 52).
• Select a location on the map with the Find on Map feature (page 65).
• Use a previously saved Favourite destination (page 66).
• Select a location from the History of previously used destinations (page 69).
• Enter the coordinate of the destination.
• Use the location where a photo was taken.
Page 36