Uniden IGO500 Owner's Manual page 106

You can control the volume of the following sound types:
Button
Page 106
You can set the alert for the different alert point categories
individually. The following alert types are available:
• Audio warning: beeps can be played (natural voice) or
the type of the alert can be announced (TTS) while you are
approaching one of these points, and an extra alert can warn
you if you exceed the given speed limit while approaching.
• Visual warning: the type of the alert point, its distance and
the related speed limit appear on the Map screen while you
are approaching one of these cameras.
For some of the alert points, the enforced or expected speed
limit is available. For these points, the audio alert can be
different if you are below or above the given speed limit.
• Only when speeding: The audio alert is only played when
you exceed the given speed limit.
• When approaching: The audio alert is always played
when approaching one of these alert points. In order to draw
your attention, the alert is different when you exceed the
speed limit.
Maps may contain driver alert information. Tap this button
to turn on or off these warnings and to set the distance
from the hazard to receive the warning at. These can be set
individually for the different warning types.
This is the main volume control. These controls affect all below
sounds. They can also be accessed from the Quick menu.
These controls affect the volume of the guidance sounds
(verbal instructions).
Description