Map Settings - Uniden IGO500 Owner's Manual

5.3.5 Map settings

You can fine-tune the appearance of the Map screen. Adjust the map view to your
needs, choose suitable colour themes from the list for both daytime and night use,
change the blue arrow to a 3D car model, show or hide 3D buildings, turn track
logging on or off, and manage you Place visibility sets (which Places to show on
the map).
The map is always shown on the screen so that you can see the effect when you
change a setting.
Button
Page 114
Switch the map view between a 3D perspective view and a
2D top-down view.
Adjust the basic zoom and tilt levels to your needs. Three
levels are available.
When selected, the map zooms out to show an overview of
the surrounding area if the next route event (manoeuvre) is far.
When you get close to the event, the normal map view returns.
Switch between daytime and night colour modes or let the
software switch between the two modes automatically a few
minutes before sunrise and a few minutes after sunset.
Select the colour scheme used in daytime mode.
Select the colour scheme used in night mode.
Description