Saving A Location As A Favourite Destination - Uniden IGO500 Owner's Manual

2. Tap any of the listed road types to modify the route. If needed, scroll the list for
all road types. You have the following options (their order depends on the
selected vehicle type):
•
slow car or you are towing another vehicle.
•
pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.
•
a per-use charge) in the routes by default. If you disable toll roads, your
software plans the best toll-free route.
•
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
roads can be in a bad condition and usually you cannot reach the speed limit
on them.
3. Tap
The orange line now shows the new recommended route.

3.5 Saving a location as a Favourite destination

You can add any location to Favourites, the list of frequently used destinations.
Planning a route to one of the Favourite destinations is described on page 64.
1. Select a destination as described before. It can be an address, a Place, any
location on the map, a previously used destination from History, a coordinate
or a location where a photo was taken.
2. When the full screen map appears with the selected location in the middle,
tap
Page 84
- You might need to avoid motorways when you are driving a
- Charge roads are pay roads where you can purchase a
- The software includes toll roads (pay roads where there is
- The software includes ferries in a planned route by default.
- The software excludes unsealed roads by default: unsealed
to confirm the changes. The software recalculates the route.
.